1、DVD AUDIO/VIDEO PLAYERDV-S757Instruction ManualThank you for purchasing the ONKYO DVD AUDIO/VIDEO PLAYER.Please read this manual thoroughly before makingconnections and plugging in the unit.Following the instructions in this manual will enableyou to obtain optimum performance and listeningenjoyment
2、from your new DVD AUDIO/VIDEOPLAYER.Please retain this manual for future reference.ContentsGetting StartedBasic PlaybackAdvanced PlaybackOthersBefore Using Your DVD Player2Function Setup2Important SafeguardsWARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
3、MOISTURE.CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER(OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol,within an equilateral triangle,is intended to alert the user to the presence of uninsulated“dan
4、gerous voltage”within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing)instructions in the l
5、iterature accompanying the appliance.WARNINGRISK OF ELECTRIC SHOCKDO NOT OPENRISQUE DE CHOC ELECTRIQUENE PAS OUVRIRAVIS1.Read Instructions All the safety and operating instructionsshould be read before the appliance is operated.2.Retain Instructions The safety and operating instructionsshould be ret
6、ained for future reference.3.Heed Warnings All warnings on the appliance and in theoperating instructions should be adhered to.4.Follow Instructions All operating and use instructions shouldbe followed.5.Cleaning Unplug the appliance from the wall outlet beforecleaning.The appliance should be cleane
7、d only asrecommended by the manufacturer.6.Attachments Do not use attachments not recommended bythe appliance manufacturer as they may cause hazards.7.Water and Moisture Do not use the appliance near water forexample,near a bath tub,wash bowl,kitchen sink,or laundrytub;in a wet basement;or near a sw
8、imming pool;and the like.8.Accessories Do not place the appliance on an unstable cart,stand,tripod,bracket,or table.The appliance may fall,causingserious injury to a child or adult,and serious damage to theappliance.Use only with a cart,stand,tripod,bracket,or tablerecommended by the manufacturer,or
9、 sold with the appliance.Any mounting of the appliance should follow the manufacturersinstructions,and should use a mounting accessoryrecommended by the manufacturer.9.An appliance and cartcombination should be movedwith care.Quick stops,excessive force,and unevensurfaces may cause theappliance and
10、cart combinationto overturn.10.Ventilation Slots and openings in the cabinet are provided forventilation and to ensure reliable operation of the appliance andto protect it from overheating,and these openings must not beblocked or covered.The openings should never be blocked byplacing the appliance o
11、n a bed,sofa,rug,or other similarsurface.The appliance should not be placed in a built-ininstallation such as a bookcase or rack unless proper ventilationis provided.There should be free space of at least 5 cm(2 in.)and an opening behind the appliance.11.Power Sources The appliance should be operate
12、d only fromthe type of power source indicated on the marking label.If youare not sure of the type of power supply to your home,consultyour appliance dealer or local power company.12.Grounding or Polarization The appliance may be equippedwith a polarized alternating current line plug(a plug having on
13、eblade wider than the other).This plug will fit into the poweroutlet only one way.This is a safety feature.If you are unable toinsert the plug fully into the outlet,try reversing the plug.If theplug should still fail to fit,contact your electrician to replace yourobsolete outlet.Do not defeat the sa
14、fety purpose of thepolarized plug.13.Power-Cord Protection Power-supply cords should be routedso that they are not likely to be walked on or pinched by itemsplaced upon or against them,paying particular attention tocords at plugs,convenience receptacles,and the point wherethey exit from the applianc
15、e.14.Lightning For added protection for the appliance during alightning storm,or when it is left unattended and unused for longperiods of time,unplug it from the wall outlet and disconnect theantenna or cable system.This will prevent damage to theappliance due to lightning and power-line surges.15.O
16、verloading Do not overload wall outlets,extension cords,orintegral convenience receptacles as this can result in a risk offire or electric shock.16.Object and Liquid Entry Never push objects of any kind intothe appliance through openings as they may touch dangerousvoltage points or short-out parts t
17、hat could result in a fire orelectric shock.Never spill liquid of any kind on the appliance.17.Servicing Do not attempt to service the appliance yourself asopening or removing covers may expose you to dangerousvoltage or other hazards.Refer all servicing to qualified servicepersonnel.18.Damage Requi
18、ring Service Unplug the appliance form thewall outlet and refer servicing to qualified service personnelunder the following conditions:A.When the power-supply cord or plug is damaged,B.If liquid has been spilled,or objects have fallen into theappliance,C.If the appliance has been exposed to rain or
19、water,D.If the appliance does not operate normally by following theoperating instructions.Adjust only those controls that arecovered by the operating instructions as an improperadjustment of other controls may result in damage and willoften require extensive work by a qualified technician torestore
20、the appliance to its normal operation,E.If the appliance has been dropped or damaged in any way,andF.When the appliance exhibits a distinct change inperformance this indicates a need for service.19.Replacement Parts When replacement parts are required,besure the service technician has used replaceme
21、nt partsspecified by the manufacturer or have the same characteristicsas the original part.Unauthorized substitutions may result infire,electric shock,or other hazards.20.Safety Check Upon completion of any service or repairs tothe appliance,ask the service technician to perform safetychecks to dete
22、rmine that the appliance is in proper operationcondition.21.Wall or Ceiling Mounting The appliance should be mountedto a wall or ceiling only as recommended by the manufacturer.22.Heat The appliance should be situated away from heatsources such as radiators,heat registers,stoves,or otherappliances(i
23、ncluding amplifiers)that produce heat.PORTABLE CART WARNINGS3125A3PrecautionsFor Canadian modelNOTE:This class B digital apparatus complies with CanadianICES-003.For models having a power cord with a polarized plug:CAUTION:TO PREVENT ELECTRIC SHOCK,MATCH WIDEBLADE OF PLUG TO WIDE SLOT,FULLY INSERT.M
24、odele pour les CanadienREMARQUE:Cet appareil numrique de la classe B estconforme la norme NMB-003 du Canada.Sur les modeles dont la fiche est polarisee:ATTENTION:POUR EVITER LES CHOCS ELECTRIQUES,INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LABORNE CORRESPONDANTE DE LA PRISE ET POUSSERJUSQUAU F
25、OND.For U.S.modelThe laser is covered by a housing which prevents exposure duringoperation or maintenance.However,this product is classified as aLaser Product by CDRH(Center for Devices and RadiologicalHealth)which is a department of the Food and Drug Administration.According to their regulations 21
26、 CFR section 1002.30,allmanufactures who sell Laser Products must maintain records ofwritten communications between the manufacturer,dealers andcustomers concerning radiation safety.If you have any complaintsabout instructions or explanations affecting the use of this product,please feel free to wri
27、te to the address on the back page of thismanual.When you write us,please include the model number andserial number of your unit.In compliance with Federal Regulations,the certification,identification and the period of manufacture are indicated on the rearpanel.FCC INFORMATION FOR USERCAUTION:The us
28、er changes or modifications not expressly approved by theparty responsible for compliance could void the users authority tooperate the equipment.NOTE:This equipment has been tested and found to comply with the limitsfor a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are d
29、esigned to provide reasonable protection againstharmful interference in a residential installation.This equipmentgenerates,uses and can radiate radio frequency energy and,if notinstalled and used in accordance with the instructions,may causeharmful interference to radio communications.However,there
30、is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception,which can be determined by turning theequipment off and on,the user is encouraged to try to correct theinterference by one or more of the fol
31、lowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This unit co
32、ntains a semiconductor laser system and is classifiedas a“CLASS 1 LASER PRODUCT”.So,to use this modelproperly,read this Instruction Manual carefully.In case of anytrouble,please contact the store where you purchased the unit.To prevent being exposed to the laser beam,do not try to openthe enclosure.
33、CAUTION:VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKFAILED OR DEFEATED.DO NOT STARE INTO BEAM.CAUTION:THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCE OF PROCEDURESOTHER THAN THOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.The label on the rightis applie
34、d on the rearpanel except for USAand Canadianmodels.1.This unit is a CLASS 1 LASER PRODUCT and employs alaser inside the cabinet.2.To prevent the laser from being exposed,do not removethe cover.Refer servicing to qualified personnel.“CLASS 1 LASER PRODUCT”4Precautions1.Regional Restriction Codes(Reg
35、ion Number)Regional restriction codes are built into DVD Players and DVD-Video media for each sales region.If the regional code of theDVD Player does not match one of the regional codes on theDVD-Video,playback is not possible.The regional number can be found on the rear panel of the DVDPlayer.(e.g.
36、4 for Region 4)2.About This ManualThis manual explains the basic procedures for operating theDVD Player.Some DVD-Video and DVD-Audio discs do notsupport the full potential of the DVD technology.Your DVDPlayer may therefore not respond to all operating commands.Refer to instruction notes on discs.A“”
37、mark may appear on the TV screen during operation.Itmeans that the operation is not permitted by the DVD Player orthe disc.3.Recording CopyrightRecording of copyrighted material for other than personal use isillegal without permission of the copyright holder.4.PowerWARNINGBEFORE PLUGGING IN THE UNIT
38、 FOR THE FIRST TIME,READ THE FOLLOWING SECTION CAREFULLY.The voltage of the available power supply differs according tocountry or region.Be sure that the power supply voltage of thearea where the unit will be used meets the required voltage(e.g.,AC 100-240 V,50/60 Hz)written on the rear panel.5.Do n
39、ot touch the unit with wet handsDo not handle the unit or power cord when your hands are wetor damp.If water or any other liquid enters the case,take theunit to an authorized service center for inspection.6.Location of the unit Place the unit in a well-ventilated location.Take special care to provid
40、e plenty of ventilation on all sides ofthe unit especially when it is placed in an audio rack.Ifventilation is blocked,the unit may overheat and malfunction.Do not expose the unit to direct sunlight or heating units asthe units internal temperature may rise and shorten the life ofthe pickup.Avoid da
41、mp and dusty places and places directly affected byvibrations from the speakers.In particular,avoid placing theunit on or above one of the speakers.Be sure the unit is placed in a horizontal position.Never placeit on its side or on a slanted surface as it may malfunction.When you place the unit near
42、 a TV,radio,or VCR,theplayback picture may become poor and the sound may bedistorted.In this case,place the unit away from the TV,radio,or VCR.7.CareFrom time to time you should wipe the front and rear panels andthe cabinet with a soft cloth.For heavier dirt,dampen a soft clothin a weak solution of
43、mild detergent and water,wring it out dry,and wipe off the dirt.Following this,dry immediately with a cleancloth.Do not use rough material,thinners,alcohol or other chemicalsolvents or cloths since these could damage the finish or removethe panel lettering.8.Notes on Handling When shipping the unit,
44、use the original shipping carton andpacking materials.For maximum protection,repack the unit asit was originally packed at the factory.Do not use volatile liquids,such as insect spray,near the unit.Do not leave rubber or plastic products in contact with the unitfor a long time.They will leave marks
45、on the finish.The top and rear panels of the unit may become warm aftera long period of use.This is not a malfunction.When the unit is not in use,be sure to remove the disc andturn off the power.If you do not use the unit for a long period,the unit may notfunction properly in the future.Turn on and
46、use the unitoccasionally.9.To Obtain a Clear PictureThe unit is a high technology,precision device.If the opticalpick-up lens and disc drive parts are dirty or worn down,thepicture quality becomes poor.To obtain a clear picture,werecommend regular inspection and maintenance(cleaning orparts replacem
47、ent)every 1,000 hours of use depending on theoperating environment.For details,contact your nearest dealer.10.Notes on Moisture CondensationMoisture condensation damages the unit.Please read the following carefully.What is moisture condensation?Moisture condensation occurs,for example,when you pour
48、acold drink into a glass on a warm day.Drops of water form onthe outside of the glass.In the same way,moisture maycondense on the optical pick-up lens inside the unit,one ofthe most crucial internal parts of the unit.Moisture condensation occurs in the following cases.When you bring the unit directl
49、y from a cold place to awarm place.When you use the unit in a room where you just turned onthe heater,or a place where the cold wind from the airconditioner directly hits the unit.In summer,when you use the unit in a hot and humid placejust after you move the unit from an air conditioned room.When y
50、ou use the unit in a humid place.Do not use the unit when moisture condensation mayoccur.If you use the unit in such a situation,it may damage discsand internal parts.Remove the disc,connect the power cordof the unit to the wall outlet,turn on the unit,and leave it fortwo or three hours.After a few
