1、PDP-TELEVISION(PLASMADISPLAYPANEL)Owners InstructionsBefore operating the unit,please read this manual thoroughly,and retain it for future reference.ON-SCREEN MENUSPicture In Picture(PIP)Colour Weakness Enhancement ModeMy Colour ControlTELETEXT(Option)SRS TruSurroundXTDigital Natural Image engineReg
2、ister your product at device is a Class B digital apparatus.BN68-00973A-00Eng 9/28/05 4:22 PM Page 1User Instructions Screen Image retentionDo not display a still image(such as on a video game or when hooking up a PC to this PDP)on theplasma monitor panel for more than 2 hours as it can cause screen
3、 image retention.This imageretention is also known as“screen burn”.To avoid such image retention,reduce the degree ofbrightness and contrast of the screen when displaying a still image.HeightThe PDP can normally operate only under 2000m in height.It might abnormally function at a placeover 2000m in
4、height so do not install and operate there.Heat on the top of the PDP TVThe top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.This is normal and does not indicate any defect or operation failure of th
5、e product.However,children should be prevented from touching the upper part of the product.The product is making a cracking noise.A cracking noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity.This is normal and not a defec
6、t of the unit.Cell DefectsThe PDP uses a panel consisting of 1,230,000(SD-level)to 3,150,000(HD-level)pixels which require sophisticated technology to produce.However,there may be few bright or dark pixels on the screen.These pixels will have no impact on the performance of the product.Avoid operati
7、ng the TV at temperatures below 5C(41F)A still image displayed too long may cause permanent damage to the PDP Panel.Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,right and centre of the screen caused by the difference of light emission
8、on the screen.Playing a DVD or a game console may cause similar effect to the screen.Damages caused by the above effect are not covered by the Warranty.Afterimage on the Screen.Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.To
9、 prevent this effect,reduce the brightness and contrast when displaying still images.Warranty-Warranty does not cover any damage caused by image retention.-Burn-in is not covered by the warranty.English-2BN68-00973A-00Eng 9/28/05 4:22 PM Page 2English-3t.Checking PartsOwners InstructionsRemote Contr
10、ol/AAA BatteriesPower CordFerrite Core for Power CordWarranty Card/Registration Card/Safety Guide Manual(Not available in all locations)S-VIDEO CablePC CableHDMI CableHDMI/DVI CablePC Audio CableComponent Cables(RCA)Sold SeparatelyAntenna CableScart CableFerrite CoreThe ferrite cores are used to shi
11、eld the cables from interference.When connecting a cable,open the ferrite core and clip it aroundthe cable.BN68-00973A-00Eng 10/6/05 4:18 PM Page 3Contents FOREWORDUser Instructions.2 CONNECTING ANDPREPARINGYOURDISPLAYControl Panel.6Infrared Remote Control.8Inserting the Batteries in the Remote Cont
12、rol.9Assembling the Stand-Base.9Installing the Display on the Wall Attachment Panel.10Connecting to an Aerial or Cable Television Network.12Connecting a Satellite Receiver or Decoder.12Switching Your Television On and Off.13Familiarizing Yourself with the Remote Control.14Plug&Play Feature.15Choosin
13、g Your Language.16 SETTING THECHANNELSStoring Channels Automatically.17Storing Channels Manually.18Skipping Unwanted Channels.20Sorting the Stored Channels.21Assigning Names to Channels.22Locking the Channel.23Using the LNA(Low Noise Amplifier)Feature.24Fine Tuning Channel Reception.25 USINGYOURDISP
14、LAYDisplaying Information.25Changing the Picture Standard.26Customizing the Picture Settings.27 Setting the Picture(PC Mode).28Selecting the Picture Size.30Viewing the DNIe Demonstration.31Freezing the Current Picture.31Setting the My Colour Control(Easy Control).32Setting the My Colour Control(Deta
15、il Control).33Setting the Blue Screen.34Using the Colour Weakness Enhancement Feature.35Using the Energy Saving Feature.36Viewing the Picture in Picture(PIP).37Using the Digital NR(Noise Reduction)Feature.40Preventing Screen Burn-in.41Reducing the Effects of Screen Burn.42Changing the Sound Standard
16、.43English-4continued.BN68-00973A-00Eng 9/28/05 4:22 PM Page 4Contents USINGYOURDISPLAY(continued)Customizing the Sound Settings.44Setting the TruSurround XT.45Adjusting the Volume Automatically.45Selecting the Internal Mute.46Setting the Melody Sound.46Selecting the Sound Mode(depending on the mode
17、l).47Setting and Displaying the Current Time.48Setting the Sleep Timer.49Switching the Television On and Off Automatically.50Viewing an External Signal Source.52Redirecting an Input to the External Output.53 USING THETELETEXTFEATURETeletext Feature.54Displaying the Teletext Information.55Selecting D
18、isplay Options.56Selecting a Teletext Page.57 ADDITIONALINFORMATION ANDCONNECTIONSConnecting to External Input/Output.58Connecting to the AV Output.59Connecting to the RCA Input.60Connecting to the S-Video Input.60Connecting to the Component Input.61Connecting to the PC Input.61Connecting to the HDM
19、I Input.62Connecting to the HDMI/DVI Compatible.62Connecting Home Theater System.63Setting up Your PC Software(Windows only).64Input Mode(PC).65 RECOMMENDATIONS FORUSEProgramming the Remote Control for Other Components.66-VCR Remote Control Codes.67-Cable Box(CATV)Remote Control Codes.68-Set-Top Box
20、s(STB)Remote Control Codes.68-DVD Remote Control Codes.69Troubleshooting:Before Contacting Service Personnel.70PressImportantNoteSymbolsEnglish-5BN68-00973A-00Eng 9/28/05 4:22 PM Page 5Control PanelThe actual configuration of your TV may be different,depending onyour model.a)bc)de)English-6Front of
21、the TVSpeakera)SOURCE buttonSelect the external input source.b)MENU buttonDisplay the on-screen menu.c)(+,-)buttonsAdjust the volume.d)C/P.(,)buttons Select channels.e)(ENTER)buttonConfirm your choice(Store or Enter).f)(POWER)buttonPress to turn the TV on and off.Power Indicator-Power Off:Blue-Power
22、 On:Offg)Remote Control SensorAim the remote control towards this spot on the TV.You can use the C/P.(,)buttons to switch on the TV when it is in standby mode depending on the model.The(+,-)and C/P.(,)buttons have the same function as the/buttons on the remote control.If the remote control no longer
23、 works or you have misplaced it,you can use the controls on the panel of the TV.continued.BN68-00973A-00Eng 9/28/05 4:22 PM Page 6Rear of the TVSide of the TVFor further details about connection,refer to pages 5863.Whenever you connect an audio or video system to your television,ensure that alleleme
24、nts are switched off.Refer to the documentation supplied with your equipment fordetailed connection instructions and associated safety precautions.a)HDMI/DVI INConnect to the HDMI jack of a device with HDMI output.These inputs can also be used as a DVI connection with separate analog audio inputs.An
25、 optional HDMI/DVI cable will be necessary to make this connection.When using the optional HDMI/DVI adapter,the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.(Not compatible with PC)b)DVI AUDIO IN L/RDVI audio outputs for external devices.c)AV OUT(
26、VIDEO/AUDIO L/R)Outputs for external devices.d)AV IN 1,2(VIDEO/AUDIO L/R)Video and audio inputs for external devices,suchas a camcorder or VCR.e)PC IN/AUDIOConnect to the video and audio output jack onyour PC.f)S-VIDEO 1,2Video input for external devices with an S-Videooutput,such as a camcorder or
27、VCR.g)COMPONENT IN 1,2Video(Y/PB/PR)and audio(AUDIO L/R)inputs forComponent.h)ANT IN(75)75 Coaxial connector for Aerial/Cable Network.i)EXT 1,EXT 2Inputs or outputs for external devices,such asVCR,DVD,video game device or video discplayers.j)SERVICEConnector for service only.k)POWER INConnect the su
28、pplied power cord.English-7g.PS-50P5HPS-63P5HBN68-00973A-00Eng 10/6/05 4:18 PM Page 7Infrared Remote ControlYyoEnglish-8The performance of the remote control may be affected by bright light.ADJUST SCREEN BRIGHTNESSTO SURROUNDINGENVIRONMENT(Refer to page 36)MENU DISPLAY/TELETEXT INDEXMOVE TO THE REQU
29、IRED MENU OPTION/ADJUST AN OPTION VALUERESPECTIVELYFASTEXT TOPIC SELECTIONTELETEXT DISPLAY/MIX BOTH TELETEXTINFORMATION AND THENORMAL BROADCAST TURNS THE TV ON AND OFFSOUND EFFECT SELECTION/TELETEXT CANCEL(Refer to page 43)NEXT CHANNEL/TELETEXT NEXT PAGEEXTERNAL INPUT SELECTION/TELETEXT PAGE HOLDTV
30、MODE SELECTION/EXIT MENU/EXIT TELETEXT(DEPENDING ON THE MODEL)INFORMATION DISPLAY/TELETEXT REVEALWHEN PRESSING THIS BUTTON,A NUMBER OF BUTTONS ON THE REMOTE CONTROL(E.G.NUMERIC,VOLUME AND CHANNEL BUTTONS)LIGHT UP FOR AFEW SECONDS AND THEN TURN OFF TO SAVEPOWER.THIS FUNCTION IS TO CONVENIENTLY USETHE
31、 REMOTE CONTROL AT NIGHT OR WHEN DARK.DIRECT CHANNEL SELECTIONSWITCH REPEATEDLY BETWEEN THELAST TWO CHANNELS DISPLAYED/TELETEXT SUB-PAGETruSurround XT MODE SELECTION(Refer to page 45)AUTOMATIC SWITCH-OFF/TELETEXT SIZE SELECTION(Refer to page 49)CONFIRM YOUR CHOICE(STORE OR ENTER)SOUND MODE SELECTION
32、(Refer to page 47)IF YOUR REMOTE CONTROL IS NOTFUNCTIONING PROPERLY,TAKEOUT THE BATTERIES AND PRESSTHE RESET BUTTON FOR ABOUT23 SECONDS.RE-INSERT THEBATTERIES AND TRY USING THEREMOTE CONTROL AGAIN.PICTURE EFFECT SELECTION(Refer to page 26)PREVIOUS CHANNEL/TELETEXT PREVIOUS PAGEMAKE THE REMOTE CONTRO
33、L WORKFOR TV,STB,VCR,CABLE,OR DVD(Refer to page 66)PICTURE STILL(Refer to page 31)PICTURE SIZE(Refer to page 30)VOLUME INCREASETEMPORARY SOUND SWITCH-OFFVOLUME DECREASEVCR/DVD FUNCTIONS:-REWIND(REW)-STOP-PLAY/PAUSE-FAST FORWARD(FF)REMOTE CONTROL SETUPPIP FUNCTIONS:-PIP ACTIVATION OR DEACTIVATION(PIP
34、)-SOURCE SELECTION(SOURCE)-SIZE SELECTION(SIZE)-CHANNEL SELECTION(P)(Refer to pages 37-39)BN68-00973A-00Eng 9/28/05 4:22 PM Page 8You must insert or replace the batteries in the remote control whenyou:Purchase the television Find that the remote control is no longer operatingcorrectly1Remove the cov
35、er on the rear of the remote control by pressingthe symbol()upwards and then pulling firmly to remove it.2Insert two R03,UM4,“AAA”1.5V or equivalent batteries takingcare to respect the polarities:-on the battery against-on the remote control+on the battery against+on the remote control3Replace the c
36、over by aligning it with the base of the remotecontrol and pressing it back into place.Do not mix battery types,i.e.alkaline and manganese.The light function on the remote control consumes a large amount of battery power.Using this function frequently will shorten the battery life time considerably.
37、Inserting the Batteries in the Remote ControlAssembling the Stand-Base1Assemble the PDP with the stand and firmly secure the PDP using4 screws provided.Two or more people should carry the PDP.Never lay thePDP on the floor because of possible damage to the screen.Always store the PDP upright.English-
38、9C,BN68-00973A-00Eng 9/28/05 4:22 PM Page 9English-10Installing the Display on the Wall Attachment PanelWall BracketComponentsPlastic Hanger:4Screw:11Screw:4Anchor:11Wall Bracket AssemblyInstallation NotesContact a technician for installing the wall bracket.Samsung Electronics is not responsible for
39、 any damages to the product or harm to customers whenthe installation is done by the customer.This product is for installing on cement walls.The product may not stay in place when installed onplaster or wood.Connect all external devices prior to installing the wall bracket.The package contents and p
40、arts supplied for the wall mount are subject to change without prior notice.HingeAccessoriesRefer to the correct installation guide according to your wall bracket.1Insert and tighten the Captive Screw in the direction of the arrow.When done,mount the wall bracket on the wall.2Before drilling into th
41、e wall,check if the lengthbetween the two locking holes at the back ofthe product is correct.If the length is too short or long,loosen all orsome of the 4 screws on the wall bracket toadjust the length.3Check the installation diagram and mark the drillpoints on the wall.Use the 5.0 mm bit to drill h
42、olesdeeper than 35 mm.Fix each anchor in the corresponding hole.Match each of the brackets and hinge holes to thecorresponding anchor holes and insert and tightenthe 11 screws.Length between thetwo locking holesCaptive ScrewWall BracketHinge(Right)There are two hinges(left and right).Use thecorrect
43、one.Hinge(Left)1Left:1Right:1Only use the components and accessories shipped with the product.continued.BN68-00973A-00Eng 9/28/05 4:22 PM Page 10English-111Remove the 4 screws on the back of the product.3Tighten the 4 screws in step 2(plastic hanger+screw)to the rear holes of the product.2Insert the
44、 screw into the plastic hanger.(See the figure below)Mount the product on the wall bracketand make sure it is properly fixed tothe left and right plastic hangers.Be careful when installing the producton the bracket as fingers can becaught in the holes.Make sure the wall bracket is securelyfixed to t
45、he wall,or the product may notstay in place after installation.4Remove safety pin(#)and insert the 4 productholders into the corresponding bracket holes(!).Thenplace the product()so that it is firmly fixed to thebracket.Make sure to reinsert and tighten the safetypin(#)to securely hold the product t
46、o the bracket.Wall Bracket Angle AdjustmentAdjust the bracket angle to-2obefore installing it on the wall.The shape of the product may vary depending on the model.(The assemblies of the plastic hangerand the screw are the same)PDPWall Bracket Wall1Fix the product to the wall bracket.2Hold the produc
47、t at the top in the center and pull itforward(direction of the arrow)to adjust the angle.(See the figure to the right)3You can adjust the bracket angle between-2and 15.Make sure to use the top center,and not the left or the right side ofthe product to adjust the angle.To mount the product on the wal
48、l brackett.BN68-00973A-00Eng 9/28/05 4:22 PM Page 11TIn order to watch television programmes broadcast via a satellite network,you must connect a satellite receiver to the rear of TV.Also,in order todescramble a coded transmission signal,you must connect a decoder tothe rear of TV.Using a SCART cabl
49、eConnect the receiver(or decoder)SCART cable to one of theSCART connectors on the rear of the television.Using a coaxial cableConnect a coaxial cable to the:Receiver(or Decoder)output socket.Television aerial input socket.If you wish to connect both a satellite receiver(or decoder)anda VCR,you shoul
50、d connect the:Receiver(or Decoder)to the VCRVCR to the televisionOtherwise,connect the receiver(or decoder)directly to thetelevision.Connecting a Satellite Receiver or DecoderTo view television channels correctly,a signal must be received bythe set from one of the following sources:An outdoor aerial
