1、t. Almost all the computers (Desktop/Notebook) in the present market possess USB port (except some of PC before 1998). If it doesnt, please use a PCI-USB Host Controller card. (Fig. 1.2)USB Port Fig. 1.2SecureII OnlyDisk can be connected with the USB port of PC directly, or through the attached USB
2、cable.The USB port of Notebook computer is usually on its side or back, which could be easily found (Fig. 1.3). SecureII OnlyDisk can be directly plugged into the USB port of the Notebook computer without the cable. USB Port Fig. 1.31.3 SecureII OnlyDisk System Requirements1.3.1 Computer Requirement
3、sl IBM PC or compatible Desktop and Notebook computers or Sub-Notebook computers with USB interface;l Mac computers with USB interface;l BIOS supporting “USB ZIP” (Required when booting system)1.3.2 Operating System Requirementsl Windows 98l Windows Mel Windows 2000l Windows XPl Mac OS 9.xl Mac OS X
4、l Linux 2.4.x 1.3.3 USB Host Controller Requirements UHCI - Universal Host Controller Interface OHCI - Open Host Controller Interface2. SecureII OnlyDisk InstallationThe installation of SecureII OnlyDisk includes driver installation on Windows 98 and application installation. 2.1 Driver Installation
5、 on Windows 98SecureII OnlyDisk uses the default driver of the operating system and requires no driver installation on Windows Me/2000/XP, Mac OS 9.x/Mac OS X and Linux 2.4.x. It is required to install the driver on Windows 98 and all the driver files are contained in a single CD-ROM. 1) Boot Window
6、s 98.2) Insert the CD-ROM into the drive.3) Plug SecureII OnlyDisk into the USB port of the PC and the system would automatically detect a USB device at once. “Add New Hardware Wizard” dialog appears. Click “Next” to continue. (Fig. 2.1) Fig. 2.14) The Wizard prompts you to either display a list of
7、drivers, or search for the best driver. Select the option “Search for the best drivers for your device (Recommended)”, and click “Next” to continue. (Fig. 2. 2) Fig. 2.25) The Wizard shows where to locate SecureII OnlyDisk drivers. Select item “CD-ROM drive” and deselect the rest. Click “Next” to co
8、ntinue. (Fig. 2.3) Fig. 2.36) The system would automatically detect the driver. Please simply select “Next” in the following steps.2.2 Application InstallationNetac supplies you applications to enable the additional functions of SecureII OnlyDisk as formatting, password, and system booting, etc. Ple
9、ase install it from the attached CD-ROM first:The installation of this application is quite easy. Just click the installation file “setup.exe” under the directory SecureII OnlyDiskToolsFormat Tool, the installation would complete automatically. Meanwhile, a new icon appears on the desktop and the “S
10、tart” menu. (Fig. 2.4) Fig. 2.4Note: “Format Tool” can be only installed on Windows 98, but the function of SecureII OnlyDisk is not limited by operating system.3. How to Use SecureII OnlyDiskSecureII OnlyDisk generally works as an ordinary storage disk. Moreover, it supports the functions of system
11、 booting and user password with the applications offered by Netac. SecureII OnlyDisk is set user password 1111 as default. Following are steps on how to unlock it: a) Plug SecureII OnlyDisk into the USB port. “Removable Disk” appears in “My Computer” representing SecureII OnlyDisk. You will find the
12、 file ”passid” in it if you try to access. (Fig. 3.1) Fig. 3.1b) Click the file “passid” and the wizard below appears prompting for user password. (Fig. 3.2) Input the default password is “1111” and click “Apply”, you may access SecureII OnlyDisk directly. Fig. 3.2You may also re-define the user password as you like by click “Change Password”. (Fig. 3.3) Fig. 3.3Please input 1111 in the bar “Old Password” and the same new password in the bar “New Password” and “Confirm New Password”. Click “Apply” to confirm. If you want to disable the On
