1、123abab567abdcefg894edcbaSTART HEREWindows 98,2000,ME,XP Make sure you are using the correct side of the poster.Windows users:Follow the steps in order.Do not connect the USB cable until instructed to do so.See your box for exact contents and system requirements.Turn on your PCWindows desktopTurn yo
2、ur PC on and wait for the Windows desktop to appear.Close any open programs,including virus-checking programs.abInsert the HP PSC software CD.Follow the onscreen instructions.abWhen prompted to plug in the device(as shown to the left),go to step 3.Return to your computer in step 9.cAttach the coverI
3、nsert the two bottom tabs of the cover into the slots on the unit.Tilt the cover down and press firmly.Make sure the tabs lock into place and the cover is even with the device.abRemove output tray and load paperUse blank white paper to prepare for print alignment.Connect the power cord and USB cable
4、Do not connect the USB cable until you see the screen in Step 2.Do not connect the USB cable to a keyboard or non-powered hub.Turn on your HP PSCTurn power On and wait for display prompt.Note:See the reference guide for adjusting the display viewing angle.Insert and align the print cartridges Make s
5、ure to remove any packing material from inside the device.Remove the bright pink tape from the print cartridges.Do not touch the gold-colored contacts or retape the cartridges.Lift the print carriage door up until it catches.Wait for the print carriage to move to the center.Lift the blue and gray la
6、tches.Hold the black print cartridge with the label on top as shown.Slide the cartridge into the right(gray latch)side of the print carriage.Hold the color print cartridge with the label on top as shown.Slide the cartridge into the left(blue latch)side of the print carriage.abcdlatchesColor label(57
7、)Black label(56)Pull the end of the gray latch toward you,press down until it stops,and then release.Make sure the latch catches below the bottom tabs.Repeat with the blue latch.eMake sure both latches are locked into position.Close the door.Press Enter on the front panel to begin alignment.After a
8、page prints,alignment is complete.Discard or recycle this page.fgFinish software setupLook at the screen with the green checkmark,and then continue.If you see the screen with the red X,follow the instructions in the Readme.Try your new HP PSC Copyright Hewlett-Packard Company 2003Printed in USA,Mexi
9、co,Germany,and Singapore.Install the software firstWindows setup posterhp psc 2170 series all-in-oneIf nothing appears on your computer screen after inserting the CD,search for setup.exe on the CD and double-click the file.Make sure there are five icons in the HP Director window.If not,see the refer
10、ence guide.Congratulations!You are now ready to use the HP PSC.Double-click the Director icon to get started.edcba13456abcdfeg782abhp_all-in-one_installer*Q3066-90192*Macintosh setup posterhp psc 2170 series all-in-oneSee your box for exact contents and system requirements.Windows users:see other si
11、de.Make sure you are using the correct side of the poster.Use blank white paper to prepare for print alignment.Remove output tray and load paperConnect the USB cableIf you have an iMac,your USB port is on the side.Do not connect the HP PSC to a USB port on a keyboard or non-powered USB hub.See the r
12、eference guide for more details.Connect the power cord Turn on your HP PSCInsert and align the print cartridgeslatchesLift the print carriage door up until it catches.Wait for the print carriage to move to the center.Lift the blue and gray latches.aMake sure to remove any packing material from insid
13、e the device.Remove the bright pink tape from the print cartridge.Do not touch the gold-colored contacts or retape the cartridges.bHold the black print cartridge with the label on top as shown.Slide the cartridge into the right(gray latch)side of the print carriage.Hold the color print cartridge wit
14、h the label on top as shown.Slide the cartridge into the left(blue latch)side of the print carriage.cdMake sure both latches are locked into position.Close the door.Press Enter on the front panel to begin alignment.After a page prints,alignment is complete.Discard or recycle this page.Pull the end o
15、f the gray latch toward you,press down until it stops,and then release.Make sure the latch catches below the bottom tabs.Repeat with blue latch.efgColor label(57)Black label(56)Install the softwareTurn your Macintosh on and wait for your Macintosh to finish starting up.Insert the HP PSC software CD.
16、Double-click the HP All-In-One Installer icon on yourdesktop.abFollow the onscreen instructions.You may have to restart your Macintosh during setup.Be sure to complete the setup assistant.cTry your new HP PSCCheck the reference guide forother ways to get started with your HP PSC.The reference guide
17、also provides instructions for changing the viewing angle on the display.Macintosh OS 9,OS XAttach the coverInsert the two bottom tabs of the cover into the slots on the device.Tilt the cover down and press firmly.Make sure the tabs lock into place and the cover is even with the device.abQ3066-90192*Q3066-90192*
