1、1. run ftpserv 2.hao to set the software(you can follow the steps one by one )12. USER SET2 3. 设定-IP4. Server Start5. Hao to set the NC,it nearly the same to Servo USYSTEM-PARAMETER-EMBEDPORTcommon：set IP address、subnet maskBASIC Focas：port number（TCP）、port number（UDP）、time intervalFTP TRANS:host na
2、me(ip address)、USER NAME、pass word Then erter the butten of page down login folderTHEN ERTER THE “+”，IT MAY APPEAR A GRAPH ,YOU CAN SEE THE “PING”- (OPRT)-PING FTP16. PARAMETER：20=9 13115#5#4=1、1 14885#1=1 11630#1=17. CNC MODE -REMOTE(dnc mode OR RET)-PROGRAM-”DIR”-OPRT-DEVICE CHANGE-EMBED ETHER-YOU CAN SEE THE PROGRAM IN THE COMPUTER ,THEN YOU CAN USE DIRECTION BUTTON TO CHOOSE THE PROGROM(OR INSERT THE PROGRAM NUMBER AND ANTER THE DNC SET )8. START TO DNC-ENTER THE “CYCLE START”
