1、2STANDARD BIDDING DOCUMENTSProcurement of WorksThe World BankWashington, D.C.May 2000Revised March 2002 and March 2003Principal Amendments to SBD Procurement of Works, January 1995 EditionFollowing publication of the SBD Procurement of Works, January 1995, a number of amendments were made through fo
2、ur corrigendaJune 23, 1995; June 7, 1996; September 10, 1996; and October 20, 1999. In addition, several editorial corrections and further amendments relating to the introduction of the Euro, briefing of unsuccessful bidders, corrections of bid and performance securities, and updating of the Postqua
3、lification and Disputes Settlement sections have been made. All of these amendments have been incorporated in this new May 2000 edition. The following list accounts for the principal amendments: Clauses dealing with corrupt and fraudulent practices are added (ITB 3.1 d, 20.4, 39.2; COPA 26.2, 63.5,
4、Form of Bid) The submission of an alternative Letter of Intent to execute a Joint Venture Agreement has been introduced (ITB 5.2 f) The eligibility for applying a 7 percent margin of preference in bid evaluation is restricted to domestic individual firms and joint ventures of domestic firms (ITB 5.4
5、, 32) The “one bid per bidder” revised clause clarifies the participation of a subcontractor in any bid (ITB 6) Clauses dealing with currencies of bid and payments allow for the use of the euro (ITB 15.2, 30; COPA 72.2) The bid validity period starts from the deadline for bid submission instead of f
6、rom bid opening (ITB 16.1) The requirements for bid security are modified to include bid bonds (ITB 17.2; Form of Bid Bond) The Employer notifies the name of the successful bidder to other bidders (ITB 35.3) A clause for debriefing by the Employer has been included (ITB 35.4) The disputes settlement
7、 clauses, including the disputes review methods have been simplified (ITB 38; COPA 67) The certificates and payment clause is revised to allow the Contractor a timely suspension of the Works and provides shorter times for outstanding payment certificates, in the event of suspension of Bank-financing
8、 (COPA 60.8, 69.4, 69.6) A new arbitration sub-clause is provided, including rules of procedure from among well-recognized institutions for foreign bidders (COPA 67.3.2) The form for the Performance Bank Guarantee (Conditional) is corrected to ensure consistency with COPA 10.2 (annex A, Form: Altern
9、ative 2) A footnote to the Performance Bond form clarifies the use of bonds and allows for the use of other forms of bonds (annex A, Form: Alternative 3) Section XII, Postqualification, is substantially revised in light of the Standard Prequalification Document: Procurement of Works, September 1999
10、(revised March 2000) Section XIII, Disputes Settlement Procedures, has been revised and excludes the procedure for settling disputes through an “independent” EngineerContentsIntroduction1Section I. Invitation for Bids (IFB)3Notes on the Form of Invitation for Bids3Section II. Instructions to Bidders
11、7Notes on the Instructions to Bidders7Table of Clauses8A. General10B. Bidding Documents14C. Preparation of Bids15D. Submission of Bids21E. Bid Opening and Evaluation23F. Award of Contract29Section III. Bidding Data33Notes on the Bidding Data33Section IV. Part I. General Conditions of Contract39Notes
12、 on the Conditions of Contract39PART I - GENERAL CONDITIONS51Section V. Part II: Conditions of Particular Application (COPA)103Notes on the Conditions of Particular Application103Section VI. Technical Specifications149Notes for Preparing Technical Specifications149Section VII. Form of Bid, Appendix
13、to Bid, and Bid Security153Form of Bid154Appendix to Bid156Form of Bid Security (Bank Guarantee)164Form of Bid Security (Bid Bond)166Section VIII. Bill of Quantities169Notes for Preparing a Bill of Quantities169Section IX. Form of Agreement, Forms of Performance Security, and Bank Guarantee for Adva
14、nce Payment189Form of Agreement190Forms of Performance Security and Bank Guarantee for Advance Payment192Section X. Drawings201Notes for Preparing the Drawings201Section XI. Explanatory Notes203Notes and Additional Clauses to Section IV203Section XII. Postqualification215Invitation for Bids216Sectio
15、n XIII. Disputes Settlement Procedure223Disputes Review Boards Rules and Procedures223Rules and Procedures for the Functions of the Disputes Review Expert (DRE)230Section XIV. Eligibility for the Provision of Goods, Works, and Services in Bank-Financed Procurement237IntroductionThese Standard Biddin
16、g Documents for Works (SBDW) have been prepared by the World Bank for use by borrowers in the procurement of admeasurement (unit price or rate) type of works contracts through international competitive bidding. The procedures and practices presented in this document have been developed through broad
17、 international experience. They are mandatory for use in works contracts financed in whole or in part by the World Bank (which includes the International Bank for Reconstruction and Development IBRD and the International Development Association IDA, hereinafter called “the Bank”), which are estimate
18、d to cost more than US$10 million (including contingency allowance) unless the Bank agrees to the use of other Bank Standard Bidding Documents on a case-by-case basis. (The Bank has also issued a civil law version of the SBDW as well as a SBDW for smaller contracts.) This edition of the SBDW is base
19、d on Part I of the fourth edition of the International Federation of Consulting Engineers (Federation Internationale des Ingenieurs Conseils, or FIDIC) Conditions of Contract for Works of Civil Engineering Construction (1987, reprinted 1992 with amendments), as well as changes to it resulting from t
20、he Banks experience. Section XI, Explanatory Notes, explains the differences between Part II of the Conditions of Contract, as included in this SBDW, and Part II of FIDIC.In order to simplify the preparation of bidding documents for each procurement, the SBDW groups the provisions that shall remain
21、unchanged in Section II, Instructions to Bidders, and in Section IV, Part IGeneral Conditions of Contract. Data and provisions specific to each procurement and contract shall be included in Section III, Bidding Data, in Section V, Part IIConditions of Particular Application, and in the Appendix to B
22、id included in Section VII. The documents also require Technical Specifications (Section VI), Drawings (Section X), Bill of Quantities (Section VIII), and other materials, which should be incorporated in the appropriate sections. In addition, sample forms to be used are provided where necessary.This
23、 SBDW has been prepared for bidding when prequalification has taken place. The process of prequalification shall follow the procedure indicated in Standard Prequalification Documents: Procurement of Works, issued by the World Bank. Prequalification shall be followed for all major works. Exceptionall
24、y, in the absence of prequalification, postqualification shall be followed, with prior agreement by the Bank. Postqualification procedures are covered in Section XII.A major change has been introduced with respect to the “quasi-judicial” role of the Engineer, as set forth in Subsection 67.1 of Part
25、I of FIDIC. For contracts estimated to cost more than US$50 million (including contingency allowances), it will be mandatory to refer disputes in the first instance to a three-member Disputes Review Board (DRB) rather than to the Engineer. For contracts estimated to cost less than US$50 million, Emp
26、loyers will have the option of (i) providing for a DRB or (ii) referring disputes to one Disputes Review Expert (rather than to the three-member DRB).Care should be taken to check the relevance of the SBDW against the requirements of the specifics works to be procured. The following general directio
27、ns should be observed when using the document:(a)Explanatory text and notes are presented in a sans serif typeface such as that used in this line and in the body of this Introduction. All the notes, except those applying to forms to be filled in by bidders, are intended only as information for the p
28、erson drafting the bidding documents and should not be included in the final documents. Standard SBD text is presented in a serif roman typeface, such as used in this line.(b)When parameters, options, instructions, and/or explanatory notes appear directly within the standard text, they are enclosed
29、with square brackets, italicized, and the key parameter bolded. For example:“The Warranty Period isinsert: number months from the date of the Operational Acceptance of the System.”(c)Specific details, such as the name of the Employer or address for bid submission, should be furnished in the space pr
30、ovided in the Bidding Data, and in the Conditions of Particular Application or Appendix to Bid. The final document should contain neither blank spaces nor options.(d)Amendments, if any, to the Instructions to Bidders and to the General Conditions of Contract, can only be made through the Bidding Dat
31、a and Conditions of Particular Application, respectively.(e)Except where indicated as mandatory, clauses included in the Conditions of Particular Application are illustrative of the provisions that should be drafted by the Employer for each procurement.These bidding documents are not suitable for lu
32、mp sum contracts without substantial changes to the method of payment and price adjustment, and to the Bill of Quantities, Schedules of Activities, and so forth.The Bank welcomes any feedback or experiences from the use of these bidding documents from bidders and from others as well.Procurement Poli
33、cy and Services GroupOperations Policy and Country ServicesThe World Bank1818 H Street, N.W.Washington, D.C. 20433U.S.A.pdocumentsworldbank.org5Section I. Invitation for BidsSection I. Invitation for Bids (IFB)Notes on the Form of Invitation for BidsThe Invitation for Bids for contracts, subject to
34、prequalification, is sent only to firms determined by the Borrower to be qualified in accordance with the Borrowers prequalification procedure. This procedure must be reviewed and commented on by IBRD if the potential contract is to be eligible for IBRD financing (see Guidelines: Procurement under I
35、BRD Loans and IDA Credits, hereinafter referred to as IBRD Guidelines for Procurement, Appendix 1, para. 1).Ideally, the Letter of Invitation for Bids is sent to the qualified bidders at the time that the prequalification results are announced.For major works, prequalification shall be used. If, exc
36、eptionally, prequalification is not used, refer to Section XII for the appropriate Invitation for Bids and for other changes to the document.Form of Invitation for Bids This sample “Form of Invitation for Bids” is a basic form that should be adapted appropriately by the Employer to cover the followi
37、ng points as required: the conditions, if any, for prequalification, stating explicitly the deficiencies that must be corrected to meet al the conditions and the time to fulfill them before bid submission; in slice and package bidding, the number of individual contracts (slices) or the specified cei
38、ling amount in total value for which the Applicant is qualified; and the finalization of preliminary joint venture agreement and any modifications required.letterhead paper of the Employer The Borrower and the Employer may be the same or different entities. The text of the Invitation for Bids and th
39、e texts of the other documents herein must be footnoted to indicate which agency will act as the Employer. dateTo:name of ContractoraddressReference: Insert IBRD Loan No. or IDA Credit No.Contract Name, and Identification No. _ / _ The Employer should insert the name and identification number of a s
40、ingle contract, or for concurrent slice and package bidding, those of individual contracts (slices) within the package for which Applicants expressed a preference, and for which they are prequalified.Dear Sirs:We hereby inform you that you are prequalified for bidding for the above cited contract. A
41、 list of prequalified and conditionally prequalified Applicants is attached to this invitation.On the basis of information submitted in your application, you would not (insert if appropriate) appear eligible for application of the domestic bidder price preference in bid evaluation. Eligibility is su
42、bject to confirmation at bid evaluation.We now invite you and other prequalified Applicants to submit sealed bids for the execution and completion of the cited contract.You may obtain further information from, and inspect and acquire the bidding documents at, our offices at mailing address, street a
43、ddress, and cable/telex/facsimile numbers. The office for inquiries and issue of bidding documents and the office for bid submission may or may not be the same. The place of bid opening may also differ and, if so, should be identified.A complete set of bidding documents may be purchased by you at th
44、e above office, on or after time and date and upon payment of a nonrefundable fee of insert amount and currency. The chargeable fee should only be nominal, to cover reproduction and mailing costs. An amount of between US$50 and US$500 equivalent is considered appropriate, depending on the size and c
45、omplexity of the works and the bidding documents.All bids must be accompanied by a security in the form and amount specified in the bidding documents, and must be delivered to address and exact location at or before time and date. Bids will be opened immediately thereafter in the presence of bidders
46、 representatives who choose to attend. Coordinate this paragraph with Clause 25 of Section II, Instructions to Bidders, “Bid Opening.” Also see footnote 4.Please confirm receipt of this letter immediately in writing by cable, fax, or telex. If you do not intend to bid, we would appreciate being so n
47、otified also in writing at your earliest opportunity.Yours truly,Authorized signature Name and title Employer 31Section II. Instructions to BiddersSection II. Instructions to BiddersNotes on the Instructions to BiddersSection II provides the information necessary for bidders to prepare responsive bi
48、ds in accordance with the requirements of the Employer. It also gives information on bid submission, opening, and evaluation, and on the award of Contract.Section II includes provisions that are to be used unchanged. Section III, Bidding Data, consists of provisions that supplement, amend, or specify information or changes to
